Colloidal grout mixer and agitator Canada price

Colloidal grout mixer and agitator Canada is also used in the construction of hydropower, railways, highways, construction, mining and other industries. You can quickly mix grout or extruder, cement and water into grout. Compared with common grouting machines, drilling rig grouting machines are characterized by high pulp efficiency, easy operation, uniform slurry and short-distance conveying capability.

When the grout mixer and agitator is working, cement and water are proportionally added into the pulping cylinder, the material in the cylinder flows at high speed, and is evenly mixed under the action of the pulping pump, and the prepared slurry flows into the storage tank through the valve. A stirring paddle is installed in the storage tank to avoid slurry settling.

Features of colloidal grout mixer and agitator:

1.High efficiency and large reserves, suitable for various grouts 2. Engineering operation;

2.Safe and reliable; the main component motor adopts high protection level;

The mixing arm of the storage tank adopts the pre-deformation structure of the frame, which has high strength, large force and no deformation.

Safety Operating Instructions for colloidal grout mixer and agitator Canada:

1. Appropriate dispersing discs and mixing heads should be selected according to work requirements. Instructions for replacing the dispersing disc or mixing head: First, loosen the nut on the bottom of the dispersing disc with a wrench, remove the dispersing disc, replace it, then replace it with a new one. The upper dispersion disc is screwed onto the drive shaft.

2. After turning on the power, turn on the power switch and turn the speed control knob of the motor to the right to rotate slowly, and to the left to slow down slowly. When the rotation speed is high, the stir bar will shake slightly, which is normal and does not affect the use. Note: The mixing head of this machine is strictly forbidden to run away from the material.

3.After finishing the work, return the governor to zero, turn off the power switch, turn off the power, and unplug.

4.Drilling injectors should be cleaned immediately after use.

When cleaning the colloidal grout mixer and agitator, the residual cement slurry should be thoroughly cleaned to prevent residual agglomeration and cause equipment failure in the next use. After cleaning the  colloidal grout mixer and agitator, add grease to the oil injection holes to extend the service life of the transmission assembly seals.

If you are interested in colloidal grout mixer and agitator Canada price, welcome to contact us! Email: sales@wodetec.com