High-pressure grout injection pump for sale in Australia
High-pressure grout injection pump for sale in Australia is an important piece of equipment in grouting construction. The performance and quality of grout injection pump for sale play a decisive role in the safety, quality, and efficiency of your grouting project. Blind and arbitrary selection of cement grout pumps for underground use can result in relatively high costs, failure to achieve expected results, or even engineering accidents. , need to be improved scientifically.
High-pressure grout injection pump for sale has the advantages of low energy consumption, low vibration, low noise, small size, high efficiency, stable and reliable performance, convenient pressure and flow adjustment, and long service life. You can set the maximum pressure of the pump. Avoid unnecessary losses during the grouting process. Grouting is a method of hydraulically pushing grout into cracks in rocks and soil layers, filling and compacting them, and frequent changes in grout pressure are formed as new cracks are hammered out during the grouting process. Please use caution when changing grout pumps.
Precautions when using high-pressure grout injection pump for sale:
1. Before using the grout pump, test the pump using the grout pump, start the pump and test the pump with clean water, observe the operation of the grout pump, and when it is normal, start the grout operation start. A common problem is that the air pipe is not connected properly and the grout pump cannot suck and discharge the grout properly. The connection between the grout pump and the air pipe should be prepared at the well. If you use a quick connector, you need to weld a quick connector (usually Φ25mm) to the inlet of the grout pump. The inlet diameter of the slurry pump is matched. Before connecting the air pipe, first press the air to expel the water. After the water in the air pipe is blown clean, the grout pump can be connected to prevent the dirty water in the air pipe from entering the grout pump and causing damage.
2. Always pay attention to the indication of the pressure gauge. If the safety device does not work even if the indicated pressure or the pressure on the pressure gauge is exceeded, investigate the cause and eliminate the problem before starting work.
3. Tools that need to be equipped The tools that need to be prepared for using the grout pump must be equipped with special tools that come with the pump, as well as various tools such as a vise.
4.Pay attention to whether the structure of the grout pump and motor is normal. If any abnormality is found, stop immediately, open the injection valve to reduce the pressure, and clear the abnormality.
5.Agitated mortar should be tested for consistency before entering the pump. During the test, the consistency meter should be perpendicular to the surface of the slurry and should sink easily under its own weight.
If you are interested in the high-pressure grout injection pump for sale, welcome to contact us. Email: sales@leadcrete.com