Cheap customized 220v slurry transfer peristaltic pump

2022-11-01 21:00:43

The structure of cheap customized 220v slurry transfer peristaltic pump consists of a circular cavity pump casing, rollers, and elastic hose. Elastic hoses are attached to the pump casing. The hose is squeezed by rollers to create a closed cutoff point. As the drum rotates, the closing point moves with the drum, and the elastic hose returns to its natural state after the drum leaves, creating a vacuum inside the hose, thereby sucking the fluid. It is extruded by the following rollers. The hose of the slurry transfer peristaltic pump is squeezed by rollers to close completely and prevent the backflow of fluid. A soft pump is therefore a positive displacement pump or a positive displacement pump and a positive displacement pump (speed proportional to flow rate). Cheap customized 220v slurry transfer peristaltic pump fluid through the peristaltic pump hose only, without valves or seals, and do not touch the rest of the pump. Since the pumped liquid is pushed out by the peristaltic movement inside the pump tube, there is no shearing effect on the liquid transfer, and delicate substances can be pumped.

220v slurry transfer peristaltic pump

Cheap customized 220v slurry transfer peristaltic pump is a new type of multi-function multi-purpose industrial pump that has absorbed advanced technology from abroad. Cheap customized 220v slurry transfer peristaltic pump has the characteristics of no seal, no leakage, strong self-priming ability, simple structure, and convenient operation. Suitable for conveying fluid materials of various viscosities, densities, corrosives, and abrasives. Hose squeeze pumps can be used in petroleum, chemical, water treatment, mining, smelting, paper, ceramics, and other industries.

220v slurry transfer peristaltic pump

If you don’t use a slurry transfer peristaltic pump, perform proper maintenance to extend its useful life.

  1. If the large flow hose squeeze pump is not used in the near future, the intake and exhaust valve body and the working cylinder should be disassembled, cleaned and brushed with anti-corrosion liquid or grease before being assembled and used.
  2. Decomposition method

(1) Remove the intake and exhaust valve body

(2) Remove the two screws on the tip of the work cylinder, and remove the cylinder head and cylinder barrel. Do not damage the seal when removing.

220v slurry transfer peristaltic pump

Cheap customized 220v slurry transfer peristaltic pump has the following advantages:

  1. Cheap customized 220v slurry transfer peristaltic pump has a sealed structure that will not leak or stain.
  2. Cheap customized 220v slurry transfer peristaltic pump adopts advanced technology, no pressure roller is required.
  3. Strong self-sucking and self-cleaning ability to generate positive and negative suction for materials.
  4. Cheap customized 220v slurry transfer peristaltic pump is easy to assemble, easy to install and maintain, low maintenance cost and easy to operate.
  5. Pumping does not interfere with the delivery of fluids with high viscosity impurities.

6.Cheap customized 220v slurry transfer peristaltic pump has long service life, high lift and high pressure at the pump port.

More details please contact us! Email:sales@wodetec.com

 

Chat online

sales@wodetec.com

+86-19913803800