Spot direct sales hose pump for mining chemical building Thailand
Spot direct sales hose pump for mining chemical building Thailand can transport media: strong polishing media, high specific gravity media, corrosive media, high solids media, shear sensitive media, weighing applications, high viscosity media, high maintenance cost applications, long Fiber media, self-suction opportunities, and crystallization media.
There are no shaft seals, bearings, or stator failures when the peristaltic pump is operating. Due to the special principle of direct sales hose pump for mining chemical building Thailand, various gas-containing materials can also be pumped without cavitation. The only fluid that is pumped is in contact with the rubber. Being a hose, the hose pump can transport any corrosive or abrasive medium that rubber can withstand. In addition, the slurry hose pump operates in the opposite direction, reducing power consumption. The mud peristaltic hose pump has a high weighing capacity and can be used as a weighing pump.
Application and maintenance of direct sales hose pump for mining chemical building Thailand:
1.direct sales hose pump for mining chemical building in Thailand：
（1） Before starting the machine, check that the joints and fasteners are solid, pressurize with water to the working pressure, and check each system for leaks.
（2） At startup and running, pay attention to whether the voltage is sufficiently stable, the speed is uniform, and the sound is normal. If the pump is equipped with other power machinery, it must be operated according to the requirements of the operating instructions. When the hose pump is idling (exhausting or venting), the pump speed should not exceed 200 ppm. The working pressure must not exceed the rated working pressure of the slurry hose pump.
（3）After use, work in clean water for 1-2 minutes and clean the workroom and pipeline to prevent damage to the hose due to residual crystallization of the liquid.
（4） How to replace the hose:
1.Remove the front end cover, remove the shaft retaining ring of the idler shaft, and remove the idler.
2.Loosen the reinforcing hoop to remove the water inlet and outlet, and remove the U-shaped hose from the pump chamber.
3.Hose installation and replacement can be reversed.
If you are looking for the direct sales hose pump for a mining chemical building in Thailand, or if you would like to work directly in the factory, please contact us directly. We provide you with the highest quality products and the most perfect after-sales service. If you have any questions, please feel free to contact us. Email: sales@wodetec.com