Hose squeeze industrial pump for pumping slurries
Hose squeeze industrial pump for pumping slurries are positive displacement pumps with low speed, high efficiency and noiseless characteristics and have a wide range of applications. The principle of operation is primarily a pair of rollers rotating in a lubricated pump cavity. These rollers and the wall of the hose squeeze industrial pump in the Russian housing cavity push the hose together. As the rollers rotate, the flat part of the hose gradually moves from the inlet end to the outlet end of the pump. In this process, the liquid-filled hose gradually returns to its original shape due to its own elastic effect, increasing in volume, creating a vacuum to suck the material, and the liquid-filled hose is gradually squeezed to reduce in volume. increase. It is forcibly discharged and the pumping operation is repeated.
Main functions of hose squeeze industrial pump for pumping slurries :
1. It is slow, noise-free and can run back and forth.
2. Unique structure, no seal, no leaks.
3. Self-sucking is possible and self-sucking ability is high.
4. Simple structure and convenient maintenance.
5. Can transport corrosive slurries and sludges that are high in particles, fibers and other impurities.
When using hose squeeze industrial pump for pumping slurries, you need to be aware of the following:
1. If the hose squeeze industrial pump for pumping slurries does not work, you can loosen the pressure block of the peristaltic pump pressure tube to extend the service life of the pump tube.
2. When choosing the hose squeeze industrial pump for pumping slurries, the pump speed should be as low as possible below 300 rpm if the discharge flow is met.
3. A dedicated tube must be used for the head of the peristaltic pump, and a common tube can be used for other interfaces.
4. The inlet of the peristaltic pump pipe should be as short as possible, and the joint and diameter of the peristaltic pump pipe should not be smaller than the pipe diameter of the peristaltic pump pump head.
5.When using, the surface of the pump tube and the surface of the pump casing that is in contact with the debris of the pump tube, especially the pressure block of the pressure tube, should be carefully cleaned.
If you want to want to know more about the hose squeeze industrial pump for pumping slurries, please contact us! Email:firstname.lastname@example.org