Fireproof material refractory spray machine for sale Saudi Arabia
Fireproof material refractory spray machine for sale Saudi Arabia uses compressed air to blow a certain percentage of refractory at high speeds to form a fire-resistant layer on the surface of the sprayed masonry. Fireproof material refractory spray machine for sale Saudi Arabia has important advantages such as fast spray construction speed, high efficiency, and excellent engineering quality. Widely used.
Fireproof material refractory spray machine for sale Saudi Arabia are indoor and outdoor wall sprays, cement mortar grouts, bridge grouts and waterproof surface sprays, fireproof sprays, insulation sprays, ceiling sprays, wall sprays, paint sprays, garden sprays, relief effects. Suitable for painting Light and convenient for spraying, handicraft spraying, rockery spraying, sound absorbing material spraying, waterproof plugs, waterproof leak repair, bridges, dams, hillsides, underground, tunnels, under construction in residential factories.
Features of refractory spray machine for sale Saudi Arabia:
1. The refractory spray machine for sale Saudi Arabia has mixing, transporting and spraying functions.
2. Concrete placement quality is good, construction speed is fast, and labor can be saved.
3. Gun metallurgy and industrial furnaces are widely used in steel mills.
4. Fireproof spray concrete machine is a stereotyped product with excellent quality and durability. We have plenty of fragile parts, rotating plates, bonding plates, spray guns and other accessories in stock.
Precautions when using the refractory spray machine for sale Saudi Arabia:
1. Preparation before the start:
A. Make sure that the contacts in each circuit of the electrical control system are solid and free of leaks.
B. Observe the oil mark to see if the reducer has enough lubricant.
C. Make sure that the fixation of each part of the machine is correct and reliable.
D. Run the machine for a short time to understand the rotation situation (note that the direction of rotation matches the direction of the arrow. Look counterclockwise from above, but for a long time. Do not idle).
E. Check the clamping force applied to the rubber seal plate.
2. How to start the spray (gunning) operation:
Once the preparatory work is complete, the mixed material can be added to the machine. At this time, the machine operator must first open the main valve and then adjust the down duct. The spray (gunning) operator then opens the nozzle water valve to wet the spray surface. At this time, the operator of the machine can start the machine and start the refractory injection operation.
3. Stop spraying.
A. Stop the machine and blow off the remaining material in the transport pipeline.
B. If the pipeline is clean, no material will be sprayed from the nozzle.
C. Finally, close the main air pipe valve.
Strictly prevent long, large objects such as steel bars and iron plates from entering the cavities of the rotor material and causing large collisions during use.