Large flow rate high-efficiency cement peristaltic pump

Enter the Industrial Peristaltic Hose Pumps to pump clay slurries – a versatile and reliable solution for pumping challenging fluids like clay slurries. Unlike conventional pumps that rely on rotating parts to move fluids, peristaltic pumps operate on a completely different principle. The pump’s mechanism involves a flexible tube or hose that is squeezed by rollers or shoes, creating a series of occlusions that push the fluid through the tubing in a pulsating manner. This unique design offers several advantages when it comes to pumping clay slurries.

The working principle of the peristaltic pump watson marlo is to drive (motor) to drive the rotor to move in the positive and negative circles. It is easy to install, and when the output material is too much, it is reversed to convey.

Hot Sell Direct Driver Peristaltic Squeeze Hose Pump is activated, the liquid is completely contained in the hose and does not come into contact with the rest of the pump. There is no other type of pump that has the advantage that this medium does not come into contact with the pump.

Features of extrusion type industrial hose pump for conveying cement:No seals, no reverse valve work, strong self-priming capacity, less worn parts, idling can occur, but positive and negative materials only pass through the hose, do not come in contact with metal, pump You can send it. maintain.

The high flow rate hose squeezes peristaltic pump has no seals, ball valves, diaphragms, gaskets, submerged rotors, stators and pistons that could cause leakage, clogging, and corrosion in the hose pump. The high flow rate hose squeezes peristaltic pump transfer abrasive slurries, corrosive acids, and gaseous fluids as easily as water. The high flow rate hose squeezes peristaltic pump does not need auxiliary equipment when it works: no check valve, sealing water flushing system, and dry running protection can be carried out.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

The industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the pump housing, which feeds the liquid through the tubing.

Wode Equipment Co., Ltd. is a leading hose peristaltic pump manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.
Many customers choose our peristaltic pump for wastewater. Our industrial hose pump has been exported to the South Africa, USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain and Nepal. The export amount is up to USD2000, 000.00. We’ve been an industrial hose pump manufacturer for more than ten years. To choose reliable supplier, contact us now!

When using the peristaltic hose pump for conveying sewage sludge, please do not tighten the pressure regulating plate too much, so as not to “stick” the pump head. Generally, it can be adjusted until there is liquid flowing out. The hose should be coated with lubricating oil inside the pump head to prolong its use.

Hose Peristaltic Pump for pumping gold mining slime working principle is that when the motor is driven by the reducer, the squeezing roller rotates along the hose, and the squeezing force generated between the roller and the pump body squeezes the hose.

The water and waste treatment peristaltic pump completely gets rid of the operation mode of the traditional pump impeller and shaft seal, and has great advantages for the transportation of media with high viscosity, high corrosiveness and large fluid impurities. The water and waste treatment peristaltic pump is a completely different principle from the traditional pump and has a wide range of applications.

Industrial extrusion cement conveying industrial peristaltic pump group by application: chemical pump, deep well pump, mud pump, sludge pump, drain pump, medical pump, mining pump, food grade pump, foam concrete pump, ceramic glaze pump, cement pump, mortar pump, grout pump, slurry pump, sewage pump, crude oil pump etc.

Industrial peristaltic pumps for high viscosity unique advantages of hose pumps make them more and more widely used in gold smelting, non-ferrous smelting, chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

Industrial peristaltic pump for paper marking also is more and more widely used in gold smelting, non-ferrous smelting, the chemical industry, mining, food processing, brewing, ceramics, water treatment, and other industries.

Depending on the structure of the pump, the hot sale peristaltic hose pump can be divided into vertical and horizontal pumps. Depending on the closed type, it can be divided into open pumps, semi-sealed pumps, and full-sealed pumps. The hot sale peristaltic hose pump can also be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking and other industries.

The high flow rate customized peristaltic pump should have a hose compression adjustment device, which needs to be adjusted continuously during the use of the pump to prevent internal leakage and flow drop.

High specification squeeze hose peristaltic concrete pump does not require continuous delivery of the pumped liquid to the pump and can run dry without costly downtime or maintenance. The recovery action of the hose or pipe creates a powerful self-priming action that allows the pump to deliver liquids containing buoyancy or waste gas.

High efficiency mine cement peristaltic hose pump is mainly composed of a pump body, slewing frame, extrusion wheel, recovery wheel, hose, and drive system. The hose is arranged in a U-shape in the pump body, when the slewing frame drives the extrusion wheel to rotate, the hose is elastically deformed due to the backlog of the extrusion wheel, forming a negative pressure suction slurry at the suction port, and discharging from the discharge outlet through the push slurry of the extrusion wheel.

During the process of Mining Dosing Peristaltic Squeeze Hose Pumps industrial production, the transportation medium is 70% or more.

A variety of new materials are used in the parts of the hose squeeze peristaltic pump for chemical, and the benefits are mainly to extend the service life and reliability of the pump in corrosive media, and to expand the range of use of the pump.