grout mixer with storage price

High speed cement slurry grout mixer and agitator  is usually equipped with grouting pump and slurry pump to mix and store slurry, with the reasonable structure, high efficiency and simple operation. The cement slurry grout mixer and agitato has double-deck chambers, including the upper chamber for slurry mixing and the lower chamber for slurry storage.

The high-speed cement grout mixer machine continuously performs stirring work, and the interval time shall not exceed 5 minutes.
The high-speed cement grout mixer machine should be rinsed with water after use to prevent the slurry from being used again after solidification.

The concrete continuous coldal colloidal cement grout mixer and agitator machine is a combination consist of a steel sheet cylindrical mixer tank heavy-duty slurry pump and agitator tank, set-up on a strong base frame.

Low price cement grout mixer and agitator for sale adopts turbo pump to make grout, and high-speed centrifugal mixer to ensure uniform mixing and no precipitation.

Trade assurance cement grout mixer and agitator machine is the special equipment of serosity mixing in grouting engineering. Not only it makes the slurry in short time, but has strong power of slurry transportation and is applied to match with various grouting pump.

The cement slurry mixing barrel and storage barrel for foundation grouting project is mainly used to mix and prepare cement slurry and other similar slurries that need to be mixed in advance.The cement slurry mixing barrel and storage barrel are used with grouting machine for pressure grouting construction of railway and highway construction, mining, hydropower engineering, thermal insulation and waterproofing, and building foundation pouring.

The new type grout making mixer concrete mixing and storage machine adopts the eddy current dispersion technology. The rotation of the centrifugal pump impeller generates a high-speed liquid flow, which forms a strong eddy current in the pulping body, so that the material is fully and evenly stirred, and the slurry is quickly made.

The high quality cement grout mixer and agitator are mainly used for mixing cement slurry (mortar) similar media. Together with the grouting pump (mortar pump), the cement grout mixer and agitator are used for pressure grouting in tunnel excavation and maintenance, mine engineering, dam construction, foundation treatment engineering of large bridges and high-rise buildings, and various underground engineering.

The grout mixer with customized voltage adopts the principle of high-speed eddy current. There is a grout pump impeller below, which can generate high-speed eddy current during operation. The secondary cement high-speed pulping machine has large shear force, fast pulping speed, and high water-cement ratio.

The portable concrete grout mixer machine is driven by a vertical motor, and the bearing seat and the main shaft are fixed on the support frame of the cantilever structure through a key connection.

The high-volume cement grout mixer and agitator produced by our company has been upgraded on the basis of the original pulping machine, which not only improves the overall sealing performance.

Electric high-intensity grout mixer agitator machine Philippines adopts a turbo pump to make pulp, and the high-speed centrifugal stirring and mixing ensures uniform mixing and no sedimentation; high reliability; the motor is installed vertically, easy to seal, with good sealing effect and low failure rate. In the case of slurry leakage, it will not affect production and use in a relatively short period of time (within 8 hours).

The cement grouting mixer machine for small scale grouting is usesto mix and store slurry, with a reasonable structure, high efficiency and simple operation. The cement grouting mixer machine for small scale grouting has double-deck chambers, including the upper chamber for slurry mixing and the lower chamber for slurry storage.

Before using the grout mixer with storage price, it is necessary to check whether the assembly of each part of the machine is firm, and the screws must be tightened.

Electrical engine grouting mixer with mixing blade is mainly used to mix and prepare similar slurries that need to be mixed in advance, such as cement slurry. Electrical engine grouting mixer with mixing blade adopts a single pulping barrel, and can also work with a simple storage barrel.

When cleaning the hydraulic cement grout mixer machine,the residual cement slurry should be thoroughly cleaned to prevent residual agglomeration, which will cause equipment failure in the next use.

The portable concrete grout mixer transports the prepared slurry into the slurry storage tank to maintain dynamic storage; after connecting the pipeline of the slurry press to the storage tank, or directly transporting it to the hopper of the slurry press by the portable concrete grout mixer, start grouting.

After the grouting is finished, the high-speed cement grout mixer machine should be cleaned in time, and the switches should be in the stop and off positions, and the power supply should be cut off in time.

According to the general rules of inspection before starting the rotating machinery, check that the waste water pump is normal and on standby; check that the water temperature of the wastewater is normal, the water volume is sufficient, and the valves are flexible.

The cement grouting mixer and storage machine for bridge grouting can be equipped with a grout pump and used for tunnel excavation and maintenance, mining well engineering, dam construction, foundation treatment of big bridges and high buildings, and pressure grouting of all kinds of underground constructions.