Now society is developing at a high speed, and engineering is everywhere. Of course, it is inseparable from the application of lightweight concrete. Foam generators lightweight concrete for thermal insulation is centralized in-floor heating, roof insulation, external wall thermal insulation, thermal insulation wall panels, etc.
Lightweight concrete (foam concrete) data thermal conductivity is low, the general residential shelter cushion density is not more than 400kg / m3 foam concrete, with thermal conductivity of 0.06 ~ 0.10w / m.k.
Foam generators lightweight concrete for floor heating and roof insulation are widely used in many countries, such as India, the Philippines, German, Turkey, etc. We just need to pour the fluid foam concrete on the clean ground or roof and level the fluid foam concrete, when the wet foam concrete is solid, we need to pour some water every 3 hours to cure the foam concrete so that the foam concrete will not crack.
How to make fluid foam concrete? Of course, we need foam and concrete. First, we need to make foam, introducing air to foam agents to make rich foams. Second, we need concrete, that is, we need cement, sand, fly ash, water, etc., and blend them into a slurry with a concrete mixer. So we need a foam concrete machine to do these procedures, it is multifunctional, and it can finish all the procedures from feeding to pumping because it has 4 parts, a screw conveyor, foam generator, concrete mixer, and foam concrete pump.
For the thermal insulation wall panels, if you want to make them, you need a wall panel machine. It likes a mold, you just need to pour fluid foam concrete into it is OK. And when the wet foam concrete is solid, we need de-mold and take the wall panels out. Then, like the above mentioned, we just water to cure them. In about 2 weeks, it can be used.
