dry spraying shotcrete concrete refractory swimming pools spray machine

Small Refractory Gunite Concrete Spraying Machine is widely used in engineering construction, mines, tunnels, culverts, subways, hydropower projects, underground works, and shotcrete construction of coal swamp mine tunnels; various industrial furnaces.

The castable gunning machine for concrete is mainly suitable for concrete spraying and supporting the construction of tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc.

Large flow refractory concrete shotcrete machine uses air pressure to convey dry material from the machine through the hose to the nozzle where water is added. Large flow refractory concrete shotcrete machine is a low to high production, continuous-feed material placement unit for dry-mix gunite or refractory materials.

The refractory gunite machine equipment in steel plant is a machine developed for spraying various powder and granular auxiliary materials or solvents into the melt in converters, electric furnaces, ladle, ladle, mixing furnace, refining equipment, and other furnaces.

Wode Equipment as refractory gunning machine for sale supplier has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

The refractory dry shotcrete machine for concrete is a kind of construction equipment suitable for water conservancy, tunnels, dams, road reinforcement, national defense, coal, civil engineering, construction, and other projects.

The slop protection refractory concrete gunite machine has the functions of stirring, conveying, and spraying; the watering quality is good, the construction speed is fast, and labor is saved.
The slop protection refractory concrete gunite machine can be used for gunning metallurgy and industrial furnaces and is widely used in steel mills, etc.

Supplier customized refractory spraying gunite machine is a new type of repair tool for the industrial furnace wall jointly developed with the more advanced gunning furnace wall thermal repair technology on the market today. Supplier customized refractory spraying gunite machine is the most advanced cold and hot repair equipment in the same industry today.

The dry spraying shotcrete concrete refractory swimming pools spray machine is mainly a straight-through rotor type non-bonding material cavity, with smooth discharge, high efficiency, and time-saving; low pressure, low-speed swirl wind, thin flow conveying, uniform and stable material flow, high spray layer strength; four-point elastic compensation clamping, Good sealing effect, less sticky dust beside the machine, and long life of wearing parts.

The hot sale refractory gunite concrete machine has stable performance, convenient operation and maintenance, energy saving and environmental protection, long service life, and can improve the quality of the spray layer.

The castable gunning machine for sale adopts a straight-through rotor-type non-adhesive material cavity, which can discharge the material smoothly and save time.

The rotor body hole and the steel liner of the variable Output dry gunning machine for refractory concrete are changed from round holes to fan-shaped holes, which increases the amount of blanking and reduces the friction area; under the same output, the speed and power can be reduced.

Best Price portable castable refractory gunite machine are mainly used for railway and highway, subterranean basement walls, Seismic reinforcing/ retrofitting of buildings, channels, shear Walls, retaining Walls, bridge retrofits, architectural concrete, mining, tunnel, culvert, subway, hydropower engineering(such as tunnels,dams and pools) and underground excavation engineering etc

Wholesale Price silicon wear-resistance refractory shotcrete machine is also equipped with a new type of pre-dumping nozzle assembly that has less repulsion, less dust, and less water addition than other regular nozzles.

Castable refractory gunite machine for soil nailing is a refractory layer formed by using compressed air to spray a specific percentage of refractory onto the surface of a material to be sprayed at high speed. Castable refractory gunite machine for soil nailing is mainly used to support the construction of concrete sprays and tunnels, culverts, subways, hydropower projects, underground projects, mining roads, slope protection of highways, etc. Hot spray refractories for industrial furnaces are also used.

The refractory dry shotcrete machine gun has the advantages of advanced technology, reasonable structure, stable performance, convenient operation and maintenance, and long service life.

The refractory shotcrete spraying machine uses compressed air to spray a certain proportion of concrete at high speed to form a concrete layer on the surface of the sprayed masonry. The spraying construction speed is fast, the efficiency is high, and the project quality is good, so it is widely used.

Refractory castable gunning machine for refractory material is specially designed for spraying refractory materials in steel plant. Refractory dry mix gunning machine in china have large different with common dry mix shotcrete machine. Usually, refracotory gunning machine is equipped with ABB frequency inverter, could achieve variable output in the use.

The refractory shotcrete machine for sale is first-class in design, exquisite in manufacture, defect-free, and durable. The refractory shotcrete machine for sale adopts a U-shaped material cavity, which has good sealing performance and is mainly used for repairing industrial furnaces.

Diesel Engine Driven Refractory shotcrete gun machine is usually used to build durable structures, such as retaining walls, swimming pools and tunnel lining. The shotcrete machine driven by diesel engine is highly mobile and can be easily transported to different job sites.