refractory spraying gunite machine for blast furnace

The shotcrete machine used for spraying refractory materials uses compressed air to spray a proportion of refractory material at high speed to form a refractory layer on the surface of the sprayed masonry. The shotcrete machine used for spraying refractory materials is widely used and is mainly applied to heat guns in the refractory layer of industrial furnaces.

Factory price refractory dry shotcrete machine in Malaysia is widely used in engineering construction, mines, tunnels, culverts, subways, hydropower projects, underground works, and shotcrete construction operations in coal swamp mine tunnels: various types of industrial furnaces, refractory materials for furnace linings Spraying or repairing: soil transportation and spraying in various slope protection and greening construction.

Wode Equipment as castable gunning machine for refractory price has developed two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h). Every model refractory gunning machine, all been equipped with an ABB frequency converter, high-pressure water pump, and new type pre-dampening nozzle. ABB frequence converter could adjust the motor speed and control the output, on the other hand, could avoid clogging the hose due to excessive output when starting. High pressure water pump could provide high pressure water for gunning machine, when going through the water ring hole atomization, could make water and refractory castable materials fully mixed with refractory pre-wet. In the new type pre-dampening nozzle, there are two needle valves to control two water lines. The operator could adjust the needle valve to precise control of water amount, if so, greatly reduces operator proficiency requirements.

Gunning refractory machine is specially designed for refractory castable material. Compared with common dry mix shotcrete machine, have some outstanding features: low rebound, low dust, reduce additive water amount, improve refractory compactness and strength, and could effectively reduce the waste of refractory materials. This point is very important to the end user, as we all know, refractory castable materials price is higher than common concrete, saving refractory castable materials is equivalent to saving the cost of production.

Best Price portable castable refractory gunite machine are mainly used for railway and highway, subterranean basement walls, Seismic reinforcing/ retrofitting of buildings, channels, shear Walls, retaining Walls, bridge retrofits, architectural concrete, mining, tunnel, culvert, subway, hydropower engineering(such as tunnels,dams and pools) and underground excavation engineering etc

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Furnace Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

Many industrial fields require shotcrete machines to spray refractories. Variable Output Dry Spraying Refractory Shotcrete Gunning Machine manchester has options for electric and air drive.

The rotor body hole and the steel liner of the variable Output dry gunning machine for refractory concrete are changed from round holes to fan-shaped holes, which increases the amount of blanking and reduces the friction area; under the same output, the speed and power can be reduced.

The gunning machine for refractory price adopts the principle of forced feeding pneumatic conveying: the gunning material enters the pressure vessel through the silo and the feeding valve, and after closing the feeding valve, the gunning material in the gunning machine is sent to the spray gun by compressed air, evenly mixed with water and sprayed to the working surface.

Variable Output dry refractory gunite concrete gun machine in steel is equipped with an ABB frequency converter, which is used to adjust the rotation speed of the rotor body and further control the output capacity of the refractory gun machine. Especially at the beginning, low output capacity can effectively avoid the block where the material carries the hose.

New refractory concrete spray shotcrete gunite machine for coal Mine Spraying is the equipment used for shotcrete. It has the characteristics of reasonable structure, stable performance, convenient operation and maintenance, long service life, etc.

Simple Structure Construction Use Refractory Shotcrete Machine main features and advantages: straight-through rotor type non-bonding material cavity, smooth discharge, time-saving: four-point elastic compensation compression.

The gunning machine for refractory price Liverpool is specially designed for the spraying and pouring of refractory materials in steel mills. Unlike conventional dry shotcrete machines, it features ABB frequency converters, new pre-dump nozzle assemblies, and a high-pressure water pump for refractory nailers.

Refractory small shotcrete building sprayer machines cover a wide range of applications, from low-cost refractories to high-volume civil engineering work. Typical shotcrete applications include swimming pools, fireproof equipment, furnace sprays, bridges, walls, pillars, beams, floors, sewers, waterways, piers, shotcrete shore repairs, sand, and gravel backfills, Includes civil and infrastructure projects, mines, tunnel linings, and embankments. Or slope stabilization.

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Construction Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

Refractory gunite shotcrete machine with Ce Certificate is a model designed and developed for furnace repair with large gunning amounts. Refractory gunite shotcrete machine with Ce Certificate also used for furnace lining repair of large converters, electric furnaces, and blast furnaces in metallurgical enterprises.

The maintenance method of the best price refractory concrete shotcrete machine: prevent the residual material in the hopper, hose and nozzle from coagulating, block the hose and nozzle, and affect the service life of the best price refractory concrete shotcrete machine.

As a supplier of Refractory spraying machine in coal mine, Wodetec Equipment has developed two different output Refractory spraying machine in the coal mine, WZ-3ER (3m3 / h) and WZ-5ER (5m3 / h). All models of best quality Refractory spraying machine in coal mine are equipped with an ABB frequency converter.

Refractory castable gunning machine for refractory material is specially designed for spraying refractory materials in steel plant. Refractory dry mix gunning machine in china have large different with common dry mix shotcrete machine. Usually, refracotory gunning machine is equipped with ABB frequency inverter, could achieve variable output in the use.

The dry mix spray refractory gunite shotcrete machine uses compressed air to transport refractory materials or similar loose materials through pipelines, control the mixing of water at the end door, and then spray them on the sprayed surface at high speed to condense and harden, thereby forming a material protection layer with a certain strength.