| Drill Intloko | Ubuchule boBomba | 100m (NW Casing) |
| Uhlobo | Uhlobo lwe-spindle, feed hydraulic | |
| Drilling Angle | 360 ° | |
| Operation Side | (R) Ekunene-uMgangatho, (L) Ekhohlo-Ngokuzikhethela | |
| Spindle Bore | 92mm(NW Casing) | |
| Yondla iStroke | 500mm | |
| Isantya seSpindle | 91/340/524rpm, 77rpm (umva) | |
| I-Spindle Torque | 79/21/14kgf-m, 93kgf-m (umva) | |
| Ukutyhala | 5,580kgf (kuxinzelelo lwehydraulic 105kg/cm²) | |
| Chuck | Incwadi, uhlobo lwemihlathi emi-3 | |
| I-Clutch engundoqo | Ipleyiti enye, uhlobo lwediski elomileyo | |
| Ugqithiso | Isixhobo sokutyibilika, 3 phambili & 1 umva | |
| Iihydraulics | Impompo | Uhlobo lweVane, umthamo oguqukayo |
| Ukuhanjiswa kweCapacity | 25 ilitha/min. kwi-1,500 rpm | |
| Uxinzelelo oluphezulu | 105kg/cm² | |
| Phakamisa | Uhlobo | Izixhobo zePlanethi, ezisetyenziswa sisilevi sesandla secam esingaphezulu |
| Ukuxhoma amandla | 1,500kg | |
| Isantya seNtambo | 17/65/101m/min. (i-avareji) | |
| Umthamo weGubu | Intambo yocingo yeDia.10mm x 35m ubude (okanye iDia.12mm x 25m) | |
| Ukurhoxa | I-Hydraulic | Isilayidi 370mm |
| Iyunithi yaMandla | Injini yedizili ejiyisayo | I-15HP kwi-2,400 rpm |
| Imoto | AC380V, 15kW | |
| Imasti | Uhlobo | I-4-pole, ifakwe kwi-skid, kunye ne-bracing kumanqanaba ama-3 |
| Ukwakhiwa | Imibhobho yentsimbi i-Dia.60mm (ngaphambili) kunye ne-Dia.48mm (ngasemva) | |
| Ubungakanani beSheave | Dia. 280mm | |
| Ubunzima (imasti) | 170kg | |
| Ubungakanani (imasti) | 1,250mm W x 1,260mm L x 5,750mm H (Ubude buthathwe ukusuka emhlabeni ukuya phezulu kwesithsaba sesithsaba) |
|
| Ubunzima | NgeSkid & Injini H16 | 1300kg |
| Ubungakanani bomatshini | W x L x H | 1,140mm x 2,186mm x 1,585mm |
