| EXERCITATIO Caput | EXERCITATIO capacitas | 100m (NW Casing) |
| Type | Genus fusum, hydrau feed | |
| EXERCITATIO Anglus | 360° | |
| Operatio Side | (R) Right-Standard, (L) Left-Libitum | |
| Fusum Bore | 92mm(NW Casing) | |
| Pasce Stroke | 500mm | |
| Fusum Volo | 91///524rpm, 77rpm (reverse) | |
| Fusum Torque | 79/21/14kgf-m, 93kgf-m (reverse) ; | |
| Thrust | 5,580kgf (ad pressionem hydraulicam 105kg/cm²) | |
| Chuck | Manuale, 3-mandi genus | |
| Pelagus Clutch | Una lamina, genus discus siccus | |
| Transmissio | Illapsum calces, deinceps & I III vicissim | |
| Hydraulica | Pump | Genus vane, volumen variabile |
| Capacitas partus | 25 sextarius / min. ad 1500 rpm | |
| Maximum Pressura | 105kg/cm² | |
| Vide | Type | Calces planetae, super-centri cam manu vectis operati |
| Capacitas levandi | 1,500kg | |
| Funis Celeritas | 17/65/101m/min. (mediocris) | |
| Tympanum Capacity | Funis filum dia.10mm x 35m longum (vel Dia.12mm x 25m) | |
| Retractatio | Hydraulic | Slide 370mm |
| Potestas Unit | Condensing Diesel Engine | 15HP ad 2,400 rpm |
| Motor | AC380V, 15kW | |
| Mast | Type | 4-polus, in LABOR insidentes, cum comprehendendo 3 gradus |
| Construction | Ferro tibiae Dia.60mm (front) et Dia.48mm (tergo) | |
| orbiculum Location | Diae. 280mm | |
| Pondus (malum) | 170kg | |
| Dimensio (mass) | 1,250mm W x 1,260mm L x 5,750mm H (Altitude ex humo ad verticem coronae fasciculum) |
|
| Pondus | Cum Skid & Engine H16 | 1300kg |
| Apparatus Dimension | W x L x H | 1,140mm x 2,186mm x 1,585mm |
