small hydroseeding machine

Start the engine of the 8000l capacity hydroseeding machine at least once a month, check the operation of the engine, and run it at idle speed for 4-5 minutes. If there is any abnormal phenomenon, it needs to be adjusted and repaired in time.

During the construction process of the abrasion resistance spraying grass seed hydroseeder machine, the spray gun head suddenly cannot be discharged, please quickly shut down the engine and inject the diesel engine.

After the Chinese hydroseeding machine for landscaping mixes the material evenly and is ready to spray, lift the poppet valve. Properly adjust the Chinese hydroseeding machine for landscaping spray angle of the nozzle according to the conditions of the construction site, and select the appropriate nozzle diameter.

After the Chinese slope hydroseeding machine is finished, please be sure to release the water from the road and the spraying pump, mainly because after the temperature reaches below zero in winter, the water in the pipeline and the spraying pump will freeze, resulting in expansion and extrusion of the pipeline and the spraying pump.

The dust, dirt, and moisture on the desert control small hydroseeding machine should be removed in time. The parts that are prone to rust and the surface of the machine parts should be coated with oil, grease, or wrapped with oil paper.

Nowadays, the factory small hydroseeding machine has gradually replaced the position of the dry spraying machine and the wet spraying machine in the construction.

The lawn seed hydroseeding machine is equipped with a 360-degree free rotating universal nozzle and is also equipped with long and short and fan-shaped nozzles and lead pipe valves, which are convenient for different working surfaces.

The hydro mulcher for slope greening is used in the greening of the highway (railway) road slope, the re-greening of the wounded mountain, the soilless coverage of the landfill, the re-greening of the mine.

ing the construction of the hydroseeder for highway greening spraying seeds, the “metal mesh laying project + vegetation substrate spraying” can be decided according to the local temperature, rainfall.

The hydroseeder for slope greening erosion control adopts a mechanical stirring system, and the tank has its own backflow scouring mode to form a three-dimensional stirring, so that the material can be continuously circulated in the tank.