When the bentonite grout mixer and storage machine is working, it is necessary to avoid long-term idling of the circulating pump, and prevent large hard particles or easily entangled ribbons from entering the circulating pump.
Regularly check whether the transmission assembly of the mixing device of the cement bentonite grout mixer machine has serious pulp leakage, or the discharged coolant is extremely turbid, and replace the accessories in time according to the degree of wear.
The bentonite cement grout mixer machine is a special equipment used for rapid grout preparation in grouting engineering.The cement grout mixer machine not only makes pulp efficiently but also has a certain ability to deliver grout.
Add a certain amount of water, turn on the bentonite cement grout mixer, add the powder evenly in the specified order, and control the feeding time at 5-6 minutes, after adding all the powder, continue to stir for 3-5 minutes;
The bentonite grout mixer and agitator should be rotated before starting to check whether there is any jamming of the moving parts and whether the connections are tight, and then it can be powered on and idle. Pay attention to whether there are other abnormal phenomena in the bentonite grout mixer and agitator during operation (add water to the transmission assembly to cool it continuously), and pay special attention to the clockwise rotation of the motor when viewed from the coupling shaft of the transmission assembly;
