New technology refractory shotcrete gunite machines to Philippines

Factory directly sale refractory dry mix shotcrete machine with air compressor uses compressed air to spray a certain proportion of refractory materials at a high speed to form a refractory layer on the surface of the sprayed masonry. Factory directly sale refractory dry mix shotcrete machine with air compressor mainly applicable to thermal gunning of refractory layers of industrial furnaces.

Refractory Chemical Plant Gunning Machines are powerful and efficient tools for construction and repair projects. Refractory Chemical Plant Gunning Machine is specifically designed to spray refractory materials, such as concrete, onto surfaces to form a strong and durable coating. Using a refractory shotcrete machine requires skill and knowledge to ensure the best results. In this article, we will discuss the steps and tips for using a refractory shotcrete machine effectively.

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Furnace Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

The dry spraying shotcrete concrete refractory swimming pools spray machine is mainly a straight-through rotor type non-bonding material cavity, with smooth discharge, high efficiency, and time-saving; low pressure, low-speed swirl wind, thin flow conveying, uniform and stable material flow, high spray layer strength; four-point elastic compensation clamping, Good sealing effect, less sticky dust beside the machine, and long life of wearing parts.

Wheel Electric dry refractory gunning machine is suitable for indoor and outdoor wall spraying, cement mortar grouting, bridge grouting and waterproof surface spraying, fireproof spraying, thermal insulation material spraying, ceiling spraying, wall spraying, paint spraying, garden spraying, relief effect paint spraying, handicraft spraying, rockery Spraying, sound-absorbing material spraying, waterproof plugging, waterproof leak repair, light and convenient for construction under bridges, dams, hillsides, basements, tunnels, and house factories.

The refractory castable gunite machine applied in steel plant has develop two different output castable gunning machine, WZ-3ER (3m3/h) and WZ-5ER (5m3/h).For every model refractory gunning machine, all been equipped with ABB frequency converter, high pressure water pump, new type pre-dampenning nozzle.

The castable gunning machine installation is widely used in mines, tunnels, culverts, subways, hydropower projects, underground works, and shotcrete construction in coal swamp mine tunnels.

In recent years, gunning machine for refractory cement has been widely used in construction, railway tunnel construction, mine shaft construction, slope reinforcement, and other fields due to their simple process, good effect, economical cost, and fast construction speed.

Good quality dry refractory concrete equipment can be used for construction inside and outside walls, water mud sand coating and outside walls thermal insulation material sand scaffolding, refractory material coating.

The refractory coating machine for refractory material is equipped with ABB frequency inverter, and could achieve variable output from 1m3/h to 3m3/h. Compared with the common dry mix shotcrete machine, refractory dry mix gunning machine is also provided new type pre-dampening nozzle assy, it is equivalent to a pre-wet system,

The slop protection refractory concrete gunite machine has the functions of stirring, conveying, and spraying; the watering quality is good, the construction speed is fast, and labor is saved.
The slop protection refractory concrete gunite machine can be used for gunning metallurgy and industrial furnaces and is widely used in steel mills, etc.

Traditionally, the installation of refractory materials is a labor-intensive and time-consuming process, which usually involves manual application methods, such as casting or manual ramming. However, with the development of technology, the Refractory Kiln Gunning Machine appeared in the refractory industry. Fire-resistant gunning machine, also known as fire-resistant shotcrete machine, is a special equipment for spraying fire-resistant materials efficiently and accurately. The working principle of the machine is to mix the refractory with water, and then pump it to the nozzle through the hose, where the refractory is pushed to the surface to be lined at high speed.

The shotcrete machine used for spraying refractory materials uses compressed air to spray a proportion of refractory material at high speed to form a refractory layer on the surface of the sprayed masonry. The shotcrete machine used for spraying refractory materials is widely used and is mainly applied to heat guns in the refractory layer of industrial furnaces.

The gunning machine for refractory price adopts the principle of forced feeding pneumatic conveying: the gunning material enters the pressure vessel through the silo and the feeding valve, and after closing the feeding valve, the gunning material in the gunning machine is sent to the spray gun by compressed air, evenly mixed with water and sprayed to the working surface.

Portable mobile refractory spraying gunite machine is widely used in mines, tunnels, culverts, subways, hydropower projects, underground projects, and shotcrete construction operations in coal and high marsh mine roadways.

Refractory spraying gunite machine for blast furnace is mainly used for thermal spraying of the refractory layer of industrial furnaces. It is mainly suitable for concrete spraying and supporting the construction of medium coal tunnels, culverts, subways, hydropower projects, underground projects, mine roadways, highway slope protection, etc. and the thermal gunning operation of the refractory layer of the industrial furnace.

As a supplier of Refractory spraying machine in coal mine, Wodetec Equipment has developed two different output Refractory spraying machine in the coal mine, WZ-3ER (3m3 / h) and WZ-5ER (5m3 / h). All models of best quality Refractory spraying machine in coal mine are equipped with an ABB frequency converter.

The refractory dry shotcrete machine gun has the advantages of advanced technology, reasonable structure, stable performance, convenient operation and maintenance, and long service life.

Refractory spraying concrete gunning machine is a kind specially designed for spraying refractory materials machine. Compared with a normally dry mix shotcrete machine, the refractory spraying concrete gunning machine has some outstanding features, low rebound, and low dust. As we all know, refractory materials are more expensive than ordinary concrete. Low rebound is a low waster, it is very important for customers to reduce project costs in spraying refractory materials.

The spot small refractory shotcrete machine for sale and its accessories produced by our company are deeply trusted by users for their excellent domestic quality and perfect after-sales service.