high flow rate peristaltic pump

The hose pump for sale can also handle slurries, shear-sensitive, corrosive, abrasive, and air-containing fluids. The hose pump for sale can be used in forward and reverse directions, just change the connection of the motor, and it can still work safely by continuously sucking air.

The characteristics of the high quality wholesale peristaltic pumps are as follows:
a) Since there are no sealing parts such as mechanical seals and gland packings, there is no need to worry about the leakage of the sealing part.
b) Since there is no sealing part, it can run dry and be used as a vacuum pump.
c) Because the fluid only passes through the special rubber tube, the impeller, rotor, cylinder, and other moving parts do not touch the liquid and do not stir and foam, so it can be directly transported in the original state.
d) It can be delivered regardless of the direction of discharge or suction. Therefore, the residual fluid in the discharge pipe can be easily discharged by reversing.
e) The parts in contact with the liquid are only rubber, which has good wear resistance and low-speed operation, so it is suitable for the transportation of slurry.

High Viscosity Hose Pump Corrosive Material Conveyor Pump designers and users are primarily interested in its ability to transport highly abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner chamber of the rubber hose, the rotor of the compression hose is completely independent of the medium.

The cement peristaltic hose pump support custom is a new, multifunction and multipurpose industrial pump developed on the basis of foreign advanced technologies. It breaks away the restrictions of traditional pump impeller and shaft seal and uses a totally different mechanism compared with the traditional pump. The cement peristaltic hose pump support custom is very suitable to transport materials with high viscosity, high corrosivity, and high content of solid particles.

Large flow Squeeze Hose Peristaltic Pump working principle is simple, there are many irreplaceable advantages and pressure performance, and its unique performance is far superior to the traditional pump!

The unique technical functions of the peristaltic hose pump for transferring material make it widely used, such as the transportation of drilling mud and crude oil, gasoline, kerosene, and other organic solvents and fuel oil in the petroleum industry; acid, alkali, salt, and Phosphoric acid feed pump.

The high-viscosity peristaltic pump for paper-making is composed of five parts: the pump casing, the rotor body, the reducer, the base, and the hose. In the field of fluid medium transportation, especially in high-concentration and high-lift production processes, hose pumps will definitely exert their unique advantages, and at the same time bring about a revolution in the production of fluid medium transportation.

Industrial Squeeze Hose Peristaltic Pump for Concrete products are the main equipment for conveying fluid media, and many factors such as particle size affect the normal operation of the pump.

The manufacturers direct price concessions industrial hose pump for sale has the self-priming ability, but it is not recommended to use a self-priming device, because: during the self-priming process, there is no liquid in the pump, which will cause dry grinding. Generally, it is allowed within 15 seconds, and the pump will be damaged after it is exceeded.

The low cost industrial peristaltic pump , also known as hose pumps or tube pumps, operate with positive displacement. The rotating drum squeezes the liquid towards the low cost industrial peristaltic pump housing, which feeds the liquid through the tubing.
As the drum moves inside the tube, expansion occurs, creating a vacuum to allow more fluid to enter. During operation, at least one roller will be close to the tube. Thus, no valve is required. The drum is turned directly by a motor or a gearbox.

Features of extrusion type industrial hose pump for conveying cement:No seals, no reverse valve work, strong self-priming capacity, less worn parts, idling can occur, but positive and negative materials only pass through the hose, do not come in contact with metal, pump You can send it. maintain.

High-Pressure Mining Clay Mud peristaltic Pump For Sale has a good self-priming ability, which is unmatched by other pumps.

The uniqueness of the high flow industrial peristaltic pump: no other pump has better self-priming ability than the hose pump, which can almost generate a perfect vacuum to suck liquid; convey gas-containing liquid and foam liquid without air resistance.

The factory directly sell high-flow peristaltic pump is flattened the elastic pump tube by squeezing the wheel, and then making the pump tube airtight. At the same time, during the forward movement of the runner, a huge negative pressure will be generated at the rear end of the pump tube. Because the hardness and resilience of the hose are super large, the negative pressure is also very large. This negative pressure is enough to suck the fluid, and then push the liquid in the pump tube out with the movement and alternation of the runner.

High Pressure Customizable peristaltic pump concrete is mainly composed of a pump casing, rotating frame, extrusion wheel assembly, supporting wheel assembly, retaining wheel assembly, high toughness wear-resistant extrusion hose and power drive system.

Industrial Hose Peristaltic Pump Liquid Filling Machine is to release the pumped fluid by extruding the pump elastically and alternately squeezing the hose, so as to achieve the purpose of feeding, just like squeezing the hose with two fingers, with the movement of the fingers, the negative pressure is formed in the tube.

Multifunction Hose Peristaltic Pump for sale, also known as peristaltic pump, is a new type of industrial pump. It is the product of the development of modern industry.

Large flow industrial peristaltic hose pump completely gets rid of the operation mode of the traditional pump impeller and shaft seal and has greater advantages for medium transportation with high viscosity, high corrosion, and large fluid impurities.

The new style low-price concrete peristaltic pump should not only be convenient for transportation but also ensure quality. The selected hose pump should have the ability of corrosion resistance and wear resistance. This hose pump runs relatively smoothly and has a relatively long service life.

Factory hot sale peristaltic pump for concrete work with roller or slider hoses. Hose pumps are dry-running, self-priming, and handle highly viscous abrasive media. Factory hot sale peristaltic pump body does not need to be sealed has no leakage at all and can output a fixed flow volume pump every time.